To begin, with the help of the tool that should bring the phone or other fine-tipped tool, we will remove the tray where the SIM card is located.

When we remove the tray we can see the two Phillips screws (PH # 00) that hold the case.

With a plastic tool we will leverage to release the notches that hold the case.

We will proceed to remove the intermediate casing that is held by eight phillips screws (PH # 00). This housing is attached to the NFC antenna so we will not remove it yet.

Take off the antenna of the battery to be able to remove it next to the intermediate housing.

We will disconnect all the components of the motherboard and then remove the two Phillips screws (PH # 00) that hold it.

We lift the plate with care because the flex of the side buttons is still connected. We disconnect it and take it off the frame.