To begin with we will remove the tray to be able to remove the back cover in the next step.

With the help of a tine unhook the back cover.

We extract the three Phillips screws, (PH # 00) that hold the shields that cover the connectors of the flexes, and we will disconnect them.

We extract the seven Phillips screws (PH # 00) that hold the speaker and unhook it.

We remove the flex bridge, apply heat to the screen to soften the adhesive that holds it to the chassis, and with the help of a fine tool, we will remove all the edges of the screen that we have to change, we can also use several spikes.