Before starting make sure the phone is switched off.

Open the back cover with the opening tool, this will prevent scratches or damage.

Separate the back cover.

Remove the battery by pulling on the bottom.

Remove the SIM card by pulling it with your finger.

Remove the micro SD card.

Remove the 14 Phillips screws, including the one that is hidden behind the "No broken" seal.

Separate the housing with the opening tool.

Disconnect the coaxial cable at both ends.

Once disconnected pull it to remove it.

Peel off the flexes of the side buttons with the pick.

Be careful not to cut the flex cable with the barb.

Disconnect the data cable from the screen by operating the connector tab and gently pulling the cable.

Remove the Phillips screw and separate the plate from the top.

Disconnect the data flex that holds the plate by pulling on the tab of the connector and gently pulling the cable.

Unplug and remove the camera by pulling it gently.

Unplug and remove the front camera by pulling it gently.

Disconnect the flex cable, by pulling on the tab of the connector and gently pulling the cable.

Take off and remove the flex with the proximity sensor.