Primux Omega 6 4G - Interconnection Flex

Guide with all the necessary steps so that you can change the interconnection flex of the Primux Omega 6 4G yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 characteristics

Screen : 5.5 inches

Resolution : 720x1280 HD

Battery : 2600 mAh / 3.7V Polymer Lithium

Processor : MTK6735M at 1Ghz 64Bit

RAM memory : 1Gb

Storage : 8Gb of internal storage, and external up to 32Gb.

Cameras : 13Mpx rear camera with auto focus, and 3Mpx front.

Operating System : Android OS version 5.1 Lollipop.

Step 2 Battery cover

First remove the battery cover, if necessary we will use a plastic opening tool, so as not to damage it.

Step 3 Battery

Remove the battery, if necessary use the opening tool from the previous step.

Step 4 Cards

We remove all the cards that are in the phone.

Step 5 Intermediate housing

Remove the 11 Phillips screws that hold the intermediate housing.

Step 6 Intermediate housing and side buttons

Using a plastic opening tool, we gradually remove the casing, and as we remove it, be careful with the side buttons because they can fall.

Step 7 Motherboard

We disconnect all the flexes and remove all the components that are on the motherboard.

Step 8

Step 9

Remove the two Phillips screws that hold the motherboard.

Step 10

We turn the base bale and disconnect the interconnection flex.

Step 11 Auxiliary plate

Disconnect the coaxial cable, take off the vibrator, carefully lift the auxiliary plate, and disconnect from the back the interconnection flex.

Step 12 Interconnection Flex

We remove the sticker, it is practically impossible to remove it without breaking, and finally, using a plastic opening tool, we are taking off the interconnection flex.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial