Before starting we must remove the tray with the cards from the tablet that we are about to repair.

With the help of a plastic tool we will unhook all the edges of the back cover.

We remove the adhesive that gets in the way to carry out the following steps, and with a flat tip tool we will disconnect the battery in order to work with greater safety.

We remove the Phillips screw (PH # 00) that holds the shield that covers the flex connector, and with a flat tool we will disconnect the flex with POGO connectors, and thus we can remove the back cover and work more comfortably.

We take off the adhesive that is above the speaker connectors, we extract the six Phillips screws (PH # 00) that hold it to the chassis, we lift it with the help of a flat tool, and we will be able to desolder the damaged speaker that we are going to replace.