Specifications :

Before you start, make sure the tablet is off.

Remove the SD card.

Remove the 2 Phillips screws that secure the back cover.

To separate the back cover, we must release the plastic hooks around the contour. We recommend the opening tool type "cortapizzas" to disassemble without scratches.

The speakers are glued to the back cover. Carefully separate that side by detaching the speakers.

Remove the adhesive covering the speaker cables on the motherboard.

Peel off the plastic holder that contains the speakers. It is held by 2 Phillips screws and a double-sided adhesive.

Separate the corresponding loudspeaker from the plastic holder.

Finally, undo the right or left speaker as appropriate. For this, we apply heat with the tip of the soldering iron to the tin while, simultaneously, we gently pull each one of the cables.