We will start by removing the back support. For this we will slide the pins that we will find in the union with the housing and we can remove it.

In the back we will find a cover, which we will slide to get to the SD card. To withdraw it, we will press and it will be automatically expelled.

In the case we will find four Phillips screws (PH # 00) which we will remove to be able to remove it.

Now, to remove the case, we will leverage with the help of an opening tool. We will slide this between the frame and the casing to release the notches that hold it.

Now we start to disconnect the components of the motherboard.

We start by removing the right speaker, for this we will disconnect and disengage it.

Now, we will continue disconnecting the components of the board.

We disconnected the battery, the connection flex with the camera plate and the side buttons, the flex of the touch screen, the display and the left speaker connector.

Now, we will disconnect the antenna cables and the charging connector.

Now all you have to do is remove the nine Phillips screws (PH # 00) that hold the motherboard.

After removing the screws, we only have to undo the base plate.