We apply heat to the screen, we introduce a fine tool that allows us to then introduce one or more plastic prongs to detach all the edges of the screen.

Remove the two Phillips screws (PH # 00) that hold the shield that covers the connectors on the screen and the battery.

We extract the three Phillips screws (PH # 00) that hold the shield.

We extract the two Phillips screws (PH # 00) that hold the module with the ignition button and the flash, and take it off.

This step would not be necessary, we have done it for convenience when making the photographs of the guide.

We disconnect and take off the rear camera.

This step would not be necessary, we have done it for convenience when making the photographs of the guide.

We extract the two Phillips screws (PH # 00) that hold the push buttons that we are going to replace, disconnect the flex from the base plate, and remove the keys if we are going to change them as well.