Before starting, make sure the tablet is off.

Disassemble the back cover. To do this, we introduce the wide part of the opening tool into the joint while simultaneously holding the screen with the suction cup.

With small lever movements, trace the contour with the opening tool. You will hear "clicks" as the plastic hooks are released.

Once disassembled, it will remain attached by the speaker cable.

Disconnect the speaker cable on the motherboard.

Remove the microphone from the housing and stretch the cables to work comfortably.

Unsolder the terminals on the base plate, applying heat with the tip of the soldering iron while simultaneously pulling the cables gently.

Finally, clean the remains of tin with a desoldering mesh.