We remove the SIM tray with a SIM removal tool.

We remove the lower part of the back shell with an opening tool.

Unscrew the Phillips screws (PH # 00).

We remove the back cover with an opening tool.

We disconnected the fingerprint reader.

We disconnected the connector of the battery and the interconnection flex to avoid damaging it.

Take off the battery with an opening tool, being careful not to break it.

Unscrew the Phillips screws (PH # 00)

We disconnect the flex from the lateral push button and the flex from the digitizer.

We disconnect the flex from the screen.

We remove the base plate with the top antenna.

We disconnect the coaxial cable from the motherboard.

We take off the digitizer flex.

We heat the screen at 80º for 2 minutes.

We introduce a metal spike between the frame and the screen, we replace it with a plastic spike so as not to scratch the frame.

We do all the contour taking off the screen until it is removed.