Using a thin tool we will open a small gap, through which we will introduce one or more plastic spikes with which we will be less likely to damage the housing. When opening the case we must disconnect the flex from the fingerprint reader.
Step 3 Intermediate housing
Remove the ten Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook the housing.
Step 4 We disconnect battery
We disconnect the battery to work with a greater security.
Step 5 Speaker
We remove the seven Phillips screws (PH # 00) that hold the lower case and the speaker, and with the help of a flat tool we will unhook both the case and the speaker.
Step 6 Interconnection flex
We disconnect the interconnection flex at both ends.
Step 7 Drums
Taking advantage of the adhesive strips that protrude from the bottom of the battery, from which we pull and will take off the battery that we have to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.