First of all we must extract the two trays that the terminal has.

With the help of a fine tool we will unhook all the edges of the back shell.

Remove the eight Phillips screws (PH # 00) that hold the module, and with the help of a flat tool unhook the module.

Remove the eight Phillips screws (PH # 00) that hold the shield and antenna, and remove them.

We disconnect all components that are connected to the motherboard that prevent us from lifting the motherboard.

Remove the Phillips screw (PH # 00) that holds the motherboard and we can lift the base plate.

We extract the battery.

We disconnect the flex from the screen that is connected to the auxiliary plate and take off the other flex from the screen that is stuck to the chassis, we apply heat to the screen and with the help of plastic prongs we will take off the screen.