We remove the tray.

To remove the back cover we will use a suction cup, with which we will lift the casing just enough to insert a flat tool and we will clear all the edges of the casing.

We extract the 7 Phillips screws (PH # 00) that hold the module and we can unhook it.

Remove the 9 Phillips screws (PH # 00) that hold the intermediate casing and we can remove it.

We disconnect all the components that are connected to the auxiliary plate, we extract the Phillips screw (PH # 00) that holds the plate, and we can remove it.

We take off the adhesive that is on top of the motherboard and the battery, and proceed to disconnect all the components that are connected to the motherboard

Remove the Phillips screw (PH # 00) that holds the motherboard and extract it.

Take off the plastic cover that protects the flex, and underneath there is a small shield that when you remove it, the keys will be released.

Remove the rubber that is in the hole where the flex passes, and take off the area of ??the buttons.

We take off the headset and the battery. To detach the battery, we will do as in the battery guide, we must pull the two stickers that are on the bottom of the battery.

Finally, we take off the interconnection flex, and remove the coaxial cable.