To start we must take off all the edges of the back cover.
Step 2 Intermediate housing
Remove the twelve Phillips screws (PH # 00) and with the help of a flat tool unhook the intermediate housing.
Step 3 We disconnect battery
We disconnect the battery to work with greater security.
Step 4 Speaker
We remove the eight Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we unhook it.
Step 5 Tray
We remove the card tray with the help of the extraction tool.
Step 6 Auxiliary board
We disconnect all the components that are connected to the auxiliary plate, and using a flat tool we will unhook it.
Step 7 Vibrator
We take off the lower area of the fingerprint reader, since it is above the flex of the vibrator, and we can already take off and unhook the damaged vibrator that we have to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.