To start, we will apply heat to the back shell, and with the help of one or more plastic spikes we will peel off all the edges of the shell.

We remove the eleven Phillips screws (PH # 00) that hold the intermediate casing, and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater security.

We peel off the adhesive that covers the connector, and we can now disconnect and remove the front camera.

We disconnect the interconnection flex, the proximity sensor flex, remove the card tray, and disconnect the coaxial cable, and with the help of a flat tool we can now lift the motherboard.

We remove the plastic cover that protects the area of the buttons, we take off the contacts and with a rigid tool we can already leverage the hooks of the shield where the side buttons are stuck, and once removed, the keys are already They will come out almost by themselves.