We will start by removing the back cover. With an opening tool, we will disengage it from the intermediate housing.

The next thing will be to remove the battery and the SIM and SD cards. This step can be done using the opening tool or simply the fingers.

To remove the intermediate housing, first remove the ten Phillips screws (PH # 00) that hold it and then unhook it with the help of a pick or other opening tool.

In order to remove the motherboard and access the rear camera, we will remove the 2 Phillips screws (PH # 00) and then disconnect and detach the components.

In this step we disconnect the flex from the LCD display.

Now we will disconnect the flex from the touch screen, take off the flex pushbuttons, the headset and the flex of front buttons.

With all the components detached from the chassis we can remove the plate.

Finally, we will desoldaremos the flex and we will take off the module of the shield of the base plate.

When finished we will clean the weld with the mesh to desolder and the flux to remove.