Wiko Darkmoon - Battery

Guide with all the steps necessary for you to change the Wiko Darkmoon battery yourself.
Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Wiko Darkmoon

Specifications
SoC: MT6582, Cortex-A7 4x1.3 GHz CPU + Mali-400MP2 GPU.
Display: Resolution: 4.7 "capacitive IPS / 720x1280 pixels.
RAM / HDD memory: 1 GB / 4 GB internal expandable with microSD.
Operating System : Android 4.2.2 Jelly Bean.
Battery : 1800 mAh.
Dimensions / Weight: 137.5x68x7.9 mm / 110 grams.
Network: HSDPA + (21.0 Mbps) and HSUPA (5.76 Mbps).
Other specifications: Wifi b / g / n, Bluetooth 4.0, mcroUSB OTG, A-GPS, FM radio, 8.0 Mpx rear camera with dual-LED flash and 5.0 Mpx front, Dual-SIM.

Before starting make sure that the mobile is off.

Step 2 SIM card

Remove the SIM tray.

Step 3 housing

Separate the upper and lower trim pieces by pushing them with your fingers.

Step 4

Remove the 2 Phillips screws that hold the metal housing, as well as the 2 that hold the lower speaker module.

Step 5

Remove the metal casing, unhooking it from the sides.

Step 6 Intermediate housing

Remove the intermediate housing, held by 5 Phillips screws.

Step 7 Battery

Disconnect the battery from the motherboard.

Step 8

Finally, take off the battery easily, with our double opening tool.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial