First of all we must extract the tray of the cards with the extraction tool.
Step 2 Back case
Remove the two Torx screws (T2) from the bottom of the phone and with the help of a metal tine we uncouple all edges of the case.
Step 3 Fingerprint Flex
We extract the two Phillips screws (PH # 00) that hold the shield that covers the connector, and then disconnect it.
Step 4 Intermediate housing
Remove the nine Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook it.
Step 5 We disconnected battery
We disconnected the battery.
Step 6 Rear camera
We disconnect and remove the rear camera.
Step 7 Components
We disconnect all the components that are connected to the motherboard.
Step 8 Motherboard
Remove the two Phillips screws (PH # 00) that hold the base plate, and using a flat tool we can lift the base plate with care.
Step 9 Handset
Finally, with the help of a fine metal spike we take off the broken handset that we have to replace.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.