Unscrew the Torx screws (T4) that hold the side plates and remove them.
Step 2 Back case
Unscrew the Torx (T4) and Phillips (PH # 00) screws that hold the rear case and remove it.
Step 3 Top auxiliary board
We disconnected the interconnection flex and took off the connection flex.
Unscrew the Phillips screws (PH # 00) that hold the card reader and the upper auxiliary plate.
We take off the card reader from the upper auxiliary plate.
We remove the upper auxiliary plate.
Step 4 Upper intermediate housing
Unscrew the Phillips screws (PH # 00) that hold the upper intermediate housing and remove it.
Step 5 Drums
We disconnect the flex from the battery, take it off and remove it.
Step 6 Speaker
Unscrew the Phillips screws (PH # 00) that hold the speaker and unhook it.
Step 7 Fingerprint reader
We disconnect the flex from the lower auxiliary plate. We take off the fingerprint reader and remove it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.