To start we will remove the back cover, we can help ourselves by introducing a fine tool through the opening and by levering it we can easily remove it.

We remove the battery.

We remove the seven Phillips screws (PH # 00) from the lower intermediate casing and with the help of a pick we unhook it.

We disconnect the coaxial cable and the flex from the screen.

We remove the Phillips screw (PH # 00) that holds the plate, detach the vibrator with the help of a fine tool and extract the auxiliary plate with the vibrator.

Finally, we place the auxiliary plate with the vibrator on a support and desolder the vibrator from the auxiliary plate.