First we will extract the card tray.

We apply heat to the screen to soften the adhesive that holds it, and with the help of a very thin tool, and a few plastic prongs we will remove all the edges of the screen. Once detached we will remove the plastic cover that is on top of the connector, and we will be able to disconnect the screen.

We extract the thirteen Phillips screws (PH # 00) and unhook the shield.

We disconnect and remove the battery.

Unhook the plastic cover, and we can now disconnect and remove the front camera.

We extract the Phillips screw (PH # 00) that holds the motherboard.

We disconnect all the components that are connected to the motherboard.

We disconnect the flex that we are going to replace the flex with load connector, and with the help of a spatula we will unhook the flex that we have to change.