We start by removing the back cover with the help of an opening tool or directly with your hands. Then, in the same way, we remove the battery.

We will heat the screen to soften the adhesive and it will be easier to remove it.

Once hot, we introduce a spike between the screen and the frame to take it off.

We will be careful in the upper left because there is the flex of the digitizer.

With a card or a very flexible and fine tool, we will take off the display introducing this one below, very carefully so that it does not scratch.

Once the display is separated, we will disconnect it from the motherboard in order to remove the screen.

We took out the seventeen Phillips screws (PH # 00) that hold the chassis to the intermediate casing and unlocked it.

To finish, we disconnected the camera from the motherboard.