Remove the battery cover using a plastic tool to avoid possible scratches or damage to the housing.

Remove the sim card and the SD card.

To remove the battery pull the bottom.

Remove the 8 Phillips screws that hold the housing

Separate the screen from the housing by working with the tine.

Disconnect the speaker and the flex from the side button

Release the Phillips screw and raise the base plate as if it were a book.

Separate the base plate from the screen using the opening tool.

Disconnect the handset and the proximity sensor with the help of a pair of tweezers.

Insert the HOT GLASS in the microwave for the time specified in the instructions for use.

If you heat it too long, the gel inside will expand and the bag will be inflated until the content is poured.

The last minute in the microwave is advised to interrupt every 15 seconds and knead the gel inside with your hands to distribute the heat.

Disconnect the digitizer connector, with the help of the opening tool make a slight lever, and then with a pair of tweezers lift the flex.

Separate the digitizer with the help of the tine, being careful with the flex.

With the help of the pick and the opening tool, and with great caution, make soft levers to be able to gradually raise the display.