To begin we must apply heat to the back cover, and then with the help of one or more plastic spikes we must take off all the edges of the case until it is detached.

We extract the seventeen Phillips screws (PH # 00) that hold the intermediate housing, but before unhooking it we must remove the card tray, and once removed we can unhook the intermediate housing.

We disconnect the battery to work with greater safety.

We disconnect and remove the front camera with the help of a flat-tipped tool.

We disconnect the interconnection flex and the coaxial cable that are connected to the motherboard.

We remove the Phillips screw (PH # 00) that holds the motherboard to the chassis, and with the help of a flat tool we will lift it carefully not to damage the rear cameras that are in it.

To finish we only have to remove the rear cameras of the motherboard that we have to replace.