To begin with we must remove the card tray to remove the back cover.

Remove the 2 Pentalobe screws (TS1) from the bottom of the housing, and with the help of a tine unhook all the edges of the housing. When it is completely unhooked, we will remove it carefully because the fingerprint reader is connected to the motherboard.

Remove the 2 Phillips screws (PH # 00) that hold the shield covering the connectors and we can disconnect the fingerprint reader.

We extract the 4 Phillips screws (PH # 00) that hold the shield, we remove it to be able to disconnect both cameras.

Disconnect all components that are connected to the motherboard, remove the 3 Phillips screws (PH # 00) that hold the motherboard, and we can remove it.

Take off and remove the battery.

Remove the 6 Phillips screws (PH # 00) that hold the speaker module and unhook it.

Disconnect the coaxial cable, the flex front buttons, remove the Phillips screw (PH # 00) that holds the plate, and take off the plate and flex.

We apply heat to the screen and with the help of one or more prongs we detach it from the chassis.