We start by heating the back cover to soften the adhesive. Once hot, we introduce a flat tool and slide it around the contour between the lid and the frame to detach it.

We remove the ten Phillips screws (PH # 00) that hold the casing and take it off the NFC antenna. We will do the same with the lower housing.

We heat the device at about 50 ° C for about a minute to soften the adhesive and thus, more easily, remove the NFC antenna and the thermal adhesive that covers the plate and the battery.

In this step we disconnect the components of the motherboard.

Remove the two Phillips screws (PH # 00) that hold the motherboard and remove the SIM / SD tray before disengaging the base plate from the chassis.

Now all you have to do is disconnect the cameras from the motherboard.