With an opening tool, we will leverage to release the notches that hold it. Then we removed the battery.

Remove the eight Phillips screws (PH # 00) that hold the casing and undo it by loosening the notches with a tool.

We disconnect the components of the base plate to be able to later remove it.

We remove the two Phillips screws (PH # 00) that hold the plate and lift it to disconnect the interconnection flex.

We take off the flexes of the chassis screen. Then we heat the screen at about 60 ° C for about a minute.

With the hot screen, we slide a flat tool between it and the frame to take it off.

All that remains is to take off the home button on the screen.