We will start by separating the chassis screen. First we remove the two pentalobe screws that we will find in the lower part of the chassis. Then, with a flat opening tool, we will make a lever to separate it moving around the contour.

We will be careful when separating the screen since it is still connected.

Remove the Phillips screws (PH # 00) that hold the shields of the screen connector and the fingerprint sensor in order to disconnect both and separate the screen from the chassis.

Now we remove the shield that covers the connector of the lateral pushbuttons and disconnect it.

We remove the support of the keys to be able to withdraw them and then we take off the flex of the chassis and we unlock it.