With a SIM removal tool we remove the trays from the SIM and SD cards.

We must remove the back cover, for this we must apply heat with a thermal mat for a few minutes, then with the help of an opening tool thin enough, we separate the case a little and introduce some plastic spikes to remove it without damaging it.

To disconnect the fingerprint reader we will use a fine plastic tool to disconnect the reader.

We extract the 12 Phillips screws (PH # 00) that hold the intermediate casing, and with the help of a flat plastic tool we unhook it and remove it.

Finally, with a fine tool we peel off the antenna of the intermediate housing from both sides, we carefully remove it.