With a SIM removal tool we remove the SIM tray.

We introduce an opening tool between the rear housing and the center housing. We do all the contour by unhooking the back cover until it is removed.

Unscrew the Phillips screws (PH # 00) that hold the upper inner shell and remove it.

Disconnect the flex from the fingerprint reader and remove the back cover completely.

Unscrew the Phillips screws (PH # 00) that hold the antenna and speaker module. We disengage it and withdraw it.

We disconnected the interconnection flex and the coaxial cable.

We take off the auxiliary plate and remove it.

We apply heat to the screen, 80º for 2 minutes.

We introduce a metal prong between the central housing and the screen. We exchange it with a plastic spike so as not to scratch the central shell. We will do all the contour by taking off the sticker from the screen.

We take off the screen completely until we remove it.