To start we will have to remove the back cover, if necessary we will use a plastic opening tool to do it.

We extract the battery.

We remove the 17 Phillips screws (PH # 00) that hold the housing, and with the help of an opening tool we uncouple the housing.

Disconnect the flex from side buttons and remove the rear camera.

We disconnect the flex cables from the rest of the components in order to remove the base plate.

Remove the 3 Phillips screws (PH # 00) that hold the base plate and we can remove the plate.

With the help of a metallic bit fine enough we take off the handset that we are going to change.