We remove the cards and trays from the phone.

We apply heat to the screen, insert a card without reaching the LCD and do the same with a spike for the rest of the edges of the phone.

Remove the 12 Phillips screws (PH # 00) and insert a tine between the back shell and the chassis of the phone.

Remove the protective stickers, remove the 4 Torx screws (T4).

Remove the 2 Phillips screws (PH # 00), disconnect the flex and coax and take off the vibrator.

Disconnect the coaxial cable, remove the 3 Torx screws (T4), lift the plate and remove the proximity sensor that we are going to change.