We will start by removing the back cover, for this we will slide an opening tool around the contour to release the notches that hold it.

To remove the loudspeaker module, first remove the four screws that hold it and then disengage it from the chassis.

To remove the intermediate casing, first remove the four screws that hold it and then unhook it from the chassis.

In this step, we remove the screw that holds the audio connector to be able to disengage it later.

Then, disconnect the battery, the flex display and the side buttons.

We disconnect the flex from the digitizer and the coaxial cable. We only have to remove the screw that holds the base plate to be able to disengage it.

Now we only have to take off the battery and then the flex cable with charging connector of the phone chassis.