We apply heat to the back cover to soften the adhesive, and with the help of a tine we will remove all the edges of the housing. Once it is detached we must disconnect the fingerprint reader.
Step 3 Shields
We remove all the Torx screws (T4) that hold the shields.
Step 4 We disconnected battery
We disconnected the battery to avoid other problems.
Step 5 Upper shield
We extract the 3 Torx screws (T4) that hold the upper shield.
Step 6 Speaker
Remove the five Torx screws (T4) that hold the speaker module and extract it.
Step 7 Components
We disconnect all the components that are connected to the motherboard.
Step 8 Screws
Remove the two Torx screws (T4) that hold the base plate.
Step 9 Front cameras and motherboard
We remove the front cameras, disconnect the coaxial cables and we can remove the base plate.
Step 10 Flex with proximity sensor and front microphone
We take off the module that we are going to replace, and with the help of a flat tool we will take off the headset of the flex that we are going to change.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.