Before you start, turn off the phone and remove the stylus.

Separate the back cover with the opening tool, thus avoiding scratching or damaging the casing.

Remove the back cover.

Remove the battery by pulling it from the bottom.

Remove the SIM card by pushing it with your finger.

Remove the microSD card by pushing it with your finger.

Remove the 13 Phillips screws, including the one hidden by the sticker that has "JYL" written on it.

Separate the intermediate housing with the opening tool.

Remove the intermediate housing.

Remove the Phillips screw hidden under the adhesive.

Disconnect the data cables from the screen.

Peel off the flex from the side buttons with the pick and pull it out with forceps.

Seapare the plate at the top.

Disconnect the coaxial antenna cable.

Disconnect the data cable and separate the motherboard.

Peel off the adhesive and disconnect the 2 cameras.

Remove the rear camera together with the flex from the front camera on the opposite side of the plate.

Peel off the front camera by carefully pulling the flex.

Disconnect the sensor by pulling on the tab of the connector and gently pulling on the cable.

Separate the sensor by detaching it from the plate.