Unscrew the Torx screws (T4) that hold the side metal plates and remove them.
Step 2 SIM tray
We open the rubber compartment that covers the SIM tray, and with a SIM removal tool we remove it.
Step 3 Back case
Unscrew the Torx screws (T4) that hold the rear case and remove it, without pulling because the fingerprint reader is connected to the base plate.
Step 4 Fingerprint reader
Remove the three Phillips screws (PH # 00) that hold the protective plate of the connections. We remove it.
We disconnect the fingerprint reader and remove the back cover.
Step 5 Components
We disconnected the interconnection flex, the flex of the screen, the flex of the battery. We disconnect the coaxial cable, the digitizer flex and the antenna connector.
Step 6 Rear camera
We disconnected the rear camera and removed it.
Step 7 Motherboard
Remove the Phillips screws (PH # 00) that hold the motherboard and remove it.
Step 8 Frontal camera
We disconnected the front camera and removed it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.