We extract the eleven Phillips screws (PH # 00) that hold the back shell, and with the help of a flat tool we will unhook the back shell.

We remove the battery.

Remove the ten Phillips screws (PH # 00) that hold the intermediate housing and with a flat tool unhook the intermediate housing.

We take off the adhesive that is on top of the base plate in order to disconnect the flex from the screen, and we can now disconnect and remove both cameras.

Unplug and detach the components that are left on the motherboard, remove the three Phillips screws (PH # 00) that hold the motherboard, and lift it to the area where the battery was before, since underneath the motherboard is connected the interconnection flex.

With the help of a metallic tool we will remove all the silicone that surrounds the headset.

Remove the three Phillips screws (PH # 00) that hold the side frame with the side keys, and with the help of a metal tool remove the silicone that blocks the hole through which the flex out of side push buttons, and with the help of some tweezers we will remove the flex.

We remove the Phillips screw (PH # 00) and the adhesives that hold the auxiliary plate with components.

To finish, we will remove the black adhesive that was under the battery, and we can also take off the interconnection flex screen that we have to replace.