With a flat tool or directly with your hands, unhook the back cover of the chassis.

Lever with a tool or directly with your hands, we will remove the battery.

Remove the fourteen Phillips screws (PH # 00) that hold the housing to the chassis and unhook it by prying it off.

We disconnect the components of the plate to be able to later remove it.

Remove the four Phillips screws (PH # 00) that hold the motherboard and lift it slightly to disengage the headset.

You have to take off the receiver with care because if you do not split in two.

We disconnect the cameras from the motherboard and remove them.

To finish, we will desoldate all the components of the motherboard.