Using a plastic opening tool, remove the back cover.

Using the necessary tools remove all the cards from the phone.

Remove the 13 Phillips screws (PH # 00).

Unhook all the edges of the intermediate casing, for this use a plastic opening tool.

Remove the Phillips screw (PH # 00) that holds the battery, lift the battery with an opening tool, and simply lifting the battery will disconnect itself.

With the help of tweezers, disconnect and remove the coaxial cable.

We have removed it completely for convenience, but if you wish you can disconnect it only from the motherboard.

Disconnect the interconnection flex and the LCD screen, for this use a plastic opening tool to lift the tabs of the connectors without damaging them, and tweezers to remove the flex cables.

Disconnect the flex cable from the digitizer, use a plastic opening tool to lift the tab of the connector taking care not to damage it, and remove the flex with tweezers. Once all the components are disconnected, lift the base plate using a plastic opening tool.

Take off the back of the buttons with a metal spike, and then with a metal opening tool, take off the base of the flex.