Memory: microSD up to 32Gb, 4Gb of internal memory and 512 Mb of RAM.
Camera: Rear 5Mp, and front VGA.
Battery: 2000mAh.
Step 2 Back case
With the help of an opening tool remove the back cover.
Step 3 Cards
Remove the cards from the phone, if necessary use some opening tool.
Step 4 Battery
With the help of an opening tool, remove the battery.
Step 5 Intermediate housing
Remove all Phillips screws, and remove the intermediate housing by inserting an opening tool between the intermediate housing and the phone frame.
Step 6 Interconnection Flex
Remove the kapton tape at the ends of the interconnection flex, lift both tabs and remove the flex.
Step 7 Sticker
Remove the sticker.
Step 8 Flex del display
Remove the Kapton tape, lift the tab and disconnect the flex to remove the base plate.
Step 9 Motherboard
Using an opening tool, lift the base plate little by little, starting with the lower area of ??the mobile phone.
Step 10 Digitizer Flex
Remove the Kapton tape from the connector, lift the tab from the connector and remove the flex.
Step 11 Speaker and vibrator
Unsolder the loudspeaker and vibrator of the lower auxiliary plate.
Step 12 Auxiliary plate
With the help of an opening tool take off the lower auxiliary plate.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.