To begin, we must remove the four Triwing screws (Y0.6) and the other four Phillips screws (PH # 00), and with the help of a flat tool we will unhook the back cover by all the edges.

Now we will have to remove the four Phillips screws (PH # 00) that hold the shield and remove it.

We disconnect the interconnection flex, since the battery connector is below, and with the help of tweezers we will disconnect the battery.

We remove the three Phillips screws (PH # 00) that hold the heatsink, and with the help of a flat tip tool we will carefully unhook it.

We disconnect the flex from the fan, and remove the three Phillips screws (PH # 00) that hold the fan, and we can remove it.

Remove the seven Phillips screws (PH # 00) that hold the module, disconnect it from the motherboard, and we can remove it.

We remove the four Phillips screws (PH # 00) that hold the speaker cover and we have already disconnected it, and remove the two screws, also Phillips, that hold the ZR key and remove it.

We disconnect all the components that are connected on the motherboard.

We remove the five Phillips screws (PH # 00) that hold the motherboard, and with the help of a flat tool we will remove it.

Now we can remove the damaged right speaker that we have to change.