Manuales / Szenio 2016DC / Speakers | Nadie Me Llama Gallina

Szenio 2016DC - Speakers

Guide with all the necessary steps so that you can change the Szenio 2016DC tablet speakers yourself.

Difficulty

TutorialsTabletsSzenioSzenio 2016DCSpeakers

For this tutorial you will need the following spared parts and tools

2 in 1 soldering station, ATTEN AT8586

106,39 €

Bobina of estaño Baku 0.3mm 91.5g

6,76 €

Opening tool Smartphone, tablet

2,19 €

Suction cup 5.5 cm to remove display, (1UND)

1,63 €

Screwdriver phillips Head Size 00

1,06 €

Electrical dissipating clamps, in blister

3,97 €

Professional fine point tweezers, ST-10

3,17 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Senio 2016DC

Features

Operating system: Android 4.2.1

Communication3G: No

Wi-Fi: yes

GPS: no

Bluetooth : no

Touchscreen: multitouch capacitive TFT 1024x600 Size: 10.1 inches

Processor: Rockchip RK3066 Cortex A9 Dual-core

Speed: 1.6GHz

Integrated camera : 2MP

Internal memory: 16GB

RAM: 1GB DDR3

Before starting make sure the tablet is off.

Step 2 Back cover

Remove the 2 Phillips screws marked.

Step 3 Back cover

Use the opening tool to open the back cover, while holding the lid with a suction cup.

Step 4

Separate the back cover. Note that the speakers are attached to it.

Step 5 Speakers

Remove the adhesive that covers the speakers.

Detach the lid so that it is not joined by the cables.

Step 6 Speakers

Finally, de-solder the speakers on the motherboard, applying heat with the tip of the soldering iron to the tin while gently pulling the cable.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial