Before starting make sure the tablet is off.

The screen is attached to the chassis by a strip of adhesive that runs all the way around.

To detach it we will apply heat to soften the adhesive and to peel off easily.

Use hot air to heat the glass or our Hot Glass, a high temperature thermal retention blanket for microwaves.

Once hot, insert the tip of the prong by any of the notches located on the sides.

Carefully trace the outline to release the adhesive, holding the screen with a suction cup.

The screen is fragile and can break, handle it with care.

Separate the upper part of the screen, this is still joined by the data flex from the bottom.

Disconnect the data flex on the display, by pulling the connector tab and pulling gently.

Separate the screen.

Disconnect the wireless charging flex, by pulling on the tab of the connector and pulling gently.

Finally, detach the connector at the bottom.