Characteristics:

To start disassembling, as always, remove the SD card first. At the bottom of the tablet, we will find the cover that covers the card reader. Open the lid and lightly press the card to be ejected.

The back cover of this tablet is attached. With the help of a pick and a spatula we will take it off. If necessary, using a heat blanket or a hot air gun, we could apply heat to soften the glue.

To remove the motherboard we will have to disconnect the components connected to it as well as the screws that hold these components. In this step we disconnect and remove the rear camera and the flex with audio connector and ignition button.

Now we remove the screws that hold the plastic module with volume pushbuttons and disconnect it to remove it. We will also disconnect the flex with magnetic load connectors and the interconnection flexes.

Now we will remove the USB charging connector. We remove the Phillips screws (PH # 00), the shield, the support, we disconnect it and we can remove the flex.

With all the components disconnected and the screws removed, and we can take off the base plate of the chassis.