Before you start, make sure the tablet is off.

Remove the 2 Phillips screws securing the back cover.

Note that one of them is covered by a warranty sticker.

Hold the screen with the suction cup and use the wide part of the double opening tool to release the plastic hooks around the contour of the lid.

The speaker is attached to the lid. It will be necessary to detach it to separate the lid.

Remove the adhesive that covers the camera.

Push the ends of the black part of the connector to release the flex.

Remove the camera by pulling gently on the flex.

Remove the adhesive covering the flex connector on the motherboard.

Unplug the flex from the motherboard.

The connector works in the same way as the camera.

Peel off the stickers that hold the antenna or battery.

Take off the wifi antenna.

Disconnect the data flex from the display on the motherboard.

Unsolder the end of the coaxial cable on the motherboard.

To do this, we apply heat with the tip of the soldering iron to the tin of the plate while simultaneously pulling the cable gently.

Repeat the process to desolder the battery and speaker from the motherboard.

Finally, remove the 3 Phillips screws from the top of the motherboard.