Remove the 2 Phillips screws securing the back cover.
Note that one of them is covered by a warranty sticker.
Step 3 Back cover
Hold the screen with the suction cup and use the wide part of the double opening tool to release the plastic hooks around the contour of the lid.
Step 4
The speaker is attached to the lid. It will be necessary to detach it to separate the lid.
Step 5 Camera
Remove the adhesive that covers the camera.
Step 6
Push the ends of the black part of the connector to release the flex.
Remove the camera by pulling gently on the flex.
Step 7 Touch screen flex
Remove the adhesive covering the flex connector on the motherboard.
Unplug the flex from the motherboard.
The connector works in the same way as the camera.
Step 8 Wifi antenna
Peel off the stickers that hold the antenna or battery.
Take off the wifi antenna.
Step 9 Flex display
Disconnect the data flex from the display on the motherboard.
Step 10 Battery
Peel off the battery at the back of the display.
We use the plastic spatula to push the battery underneath.
Step 11 Board
Remove the 3 Phillips screws that hold the motherboard.
Step 12
Separate the base plate next to the components.
Use antistatic protection if you manipulate the motherboard with your hands.
Step 13 Display
Hold the display with the suction cup and release the plastic notches in the frame.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.