Before you start, make sure the tablet is off.

Remove the 2 Phillips screws securing the back cover.

Note that one of them is covered by a warranty sticker.

Hold the screen with the suction cup and use the wide part of the double opening tool to release the plastic hooks around the contour of the lid.

The speaker is attached to the lid. It will be necessary to detach it to separate the lid.

Remove the adhesives that hold the coaxial antenna cable.

Finally, unsolder the end of the coaxial cable on the base plate.

To do this, we apply heat with the tip of the soldering iron to the tin of the plate while simultaneously pulling the cable gently.