Before starting, make sure the tablet is off.

The back cover is easily removed. We recommend the special opening tool, since it allows you to disassemble the lid without damaging it or scratching it.

Go around the entire contour with this tool that resembles a "pizza cutter" and separate the back cover.

Remove the stickers that cover the speaker terminals on the motherboard.

Disconnect the flex from the touch screen on the motherboard. To do this, press the connector tab and gently pull the flex.

Peel off the speaker from the plastic housing.

Finally, unsolder the terminals of the motherboard. To do this, apply heat to the tin with the tip of the soldering iron while simultaneously pulling gently on the wire.