Open the small lid located on the back, next to the camera.

Remove the micro SD card.

Remove the hidden Phillips screw, located next to the SD slot.

Hold the screen with the suction cup. While pulling the suction cup upwards, disassemble the back cover with the double opening tool.

The screen is still held by the flex data cable.

Disconnect the flex cable by pulling on the tab of the connector and pulling gently on it.

Remove the 6 Torx screws (marked in blue) and the 3 Phillips screws (red) indicated in the photograph.

Unplug the flex from the motherboard, by pulling on the tab of the connector and gently pulling the cable.

Remove the plastic cover with the flex, prying it with the opening tool.

Peel off the right speaker by prying it with the opening tool.

Remove the antenna module, prying it gently with the opening tool.

Remove the left speaker cover by prying it gently with the opening tool.

Finally remove the left speaker.