First of all we must apply heat to the screen to soften the adhesive that holds it, and with the help of a suction cup we will lift the screen a little to introduce a fine tool, with which we will open a small hole and introduce one or more prongs plastic and thus less likely to damage the screen.

We remove the two Phillips screws (PH # 00) that hold the shield that covers the connectors of the battery and that of the screen, and then we will disconnect the battery to work with greater security, and we will remove the screen.

We disconnect the flex bridge, extract the seven Phillips screws (PH # 00) that hold both the speaker and the side cover, and remove them.

We extract the tray with the extraction tool.

We extract the two Phillips screws (PH # 00) that hold the motherboard, and with the help of a flat tool we lift it.

And to finish we will only have to disconnect and take off the damaged front camera.